The first prototype of this board was a disaster. I whipped it up in a rush just to fill some spare space before sending the main board to print, and while the Crunchtrack prototype came out nearly perfect, I messed up almost everything in this very simple board. Continue reading OBD adapter board
All posts by mastrogippo
Schematics are online! As a bonus, I designed 2 verisons of the packages for the SIM800 modules, one with all the pins and one with only the mandatory pins to get the module up and running. I had to resort to this trick to save space for the tightly packed tracks, that on the PCB are spaced at 6/6 mil. A better board manufacturer would allow me to decrease the size of the tracks, but that’s for a future prototype. I don’t like having the modules “flapping around” in the breeze with most of their pins unsoldered, especially in the mechanical stressful environment that is a vehicle.
Design considerations and first prototype
An important goal that I set for this project is that it must be easily replicated and modified by everyone; that’s why I went for a 2 layer board and and a microcontroller in a LQFP package. To meet regulations I will probably have to switch to a 4 layer board in the production version.
Continue reading Design considerations and first prototype
Crunchtrack: web site
I think that we need to create a common repository/wiki database where we can share reverse engineered car information with a common standard, aiming at being able to automatically download a “descriptor” file that can run on an universal software.
This is not as hard as it seems; most of the data is usually extracted as the raw number, multiplied by a number, plus an offset. More complex formulas are not very common but exist and will be handled accordingly.
So, for every car, we have a page that states pinouts, bus speed, misc notes, and all the found messages. Log files can be shared and will be available for anyone to study.
Car: Renault Twizy
Bus speed: 500Kbps
– OBD connector
— Pin 6: CAN H
— Pin 14: CAN L
Battery pack temperature,0x55, 8,1000ms
Single cell voltage 1-5,0×556,8,100ms
0x155 BMS status (10ms)
|Byte 0||Byte 1||Byte 2||Byte 3||Byte 4||Byte 5||Byte 6||Byte 7|
|PWRH PWRL||Battery power||–||0x0F00||(0x7D0-(n&0x0FFF))*16||kW|
|Instantaneous battery power measured from the BMS. A negative value indicates charging, either due to regenerative braking or AC charging connection. This value can be used in conjunction with BV (0x55F) to calculate current flow. The indicated power is the total coming from the battery, power consumed by auxiliary devices is not separated from the traction power.
Example: (0x7D0-(0x97FF&0x0FFF))*16 = -752W (charging)
|BMS unit status.
· 0x94 = Initialization in progress; data acquired may not be valid
· 0x54 = BMS ready
|Battery state of charge.
Example: 0x6BF0/400 = 69.06%
This is just a brief example; the table may need more columns (to define if the message is read only or if we can send it to activate stuff, a method to handle bitmapped statuses, etc.) but it’s just to explain the idea. There will be a standard way to describe requests and responses, and how to handle data spanning multiple messages.
The community will help to converge to a standard way to save log files, develop tools to convert them, study their content and publish results. I have a small collection of softwares I’ve written in these years that I will make available with an open source license. Other options are:
OVMS CAN-RE-tool https://github.com/openvehicles/CAN-RE-Tool
Project Crunchtrack: Intro
I’ve always loved complex machines that can handle and transform huge amounts of energy to make very useful work. Among these machines, my life choices got me into the automotive field, where I’ve been working for the past 10 years. Just after school I found a job at Texa, an automotive diagnostic company, where I was writing software and reverse engineering communication protocols. My passion for efficiency and electronics made me leave that job after 5 years to pursue a career more focused on pure electric vehicles, so I joined another company where I developed power trains for EV conversions, and I even worked on a DeLorean conversion.
While working with electric cars, I stumbled upon two very interesting open source projects: Continue reading Project Crunchtrack: Intro
Arduino day 2015 – Telephone game
This year’s Arduino day we left our hackerspace Crunchlab in the morning to spend the day with our friends from Trieste and help them in the opening of their hackerspace, the Mittelab. After an evening filled with Arduino and soldering workshops, I was looking at all the arduinos left from the workshop and had a dumb idea: let’s play a telephone game! So I connected all the arduinos together, loaded a simple sketch and started throwing characters at them!
The HackADay Prize 2015
The moment that every hacker has been waiting for has arrived!!! Today HackADay launched the HackADay Prize, a contest where the best product that can change the world will be awarded A FRIGGIN’ TRIP TO SPACE!
Last year I “lost”, well I wouldn’t call it losing as I scored an awesome t-shirt and got the chance to meet a lot of awesome people at the big event in Munich, but this year I’m in for the grand prize! And for that I must always be up to date with all the news about the contest, so I started to get my hands dirty and built this thing to print tweets from the HaD Prize account:
This years contest is all about green technology, so what better way to offset all that good will than printing all @hackadayprize tweets on paper?
Just kidding, I saved that printer from the dumpster and the paper I’m using would have gone to waste anyway; also, I was already using the back of the “discarded” paper to take notes! :)
I tried the ESP8266 modules as soon as they became available and made a few projects, but nothing to write HackADay about… Continue reading The HackADay Prize 2015
Fixing my car
Summer is coming, and it’s time to fix a few issues in my car! First of all, the easy and fun part: my air vent had a few flaps missing, so I wanted to remake them. Easy peasy! A few minutes with a caliper and CAD, and the design was ready:I then printed the file on Crunchlab‘s 3D printer and after a few tests I got this:
I’m happy to announce that I won the HackADay trinket contest!!
1337 3310 tool demo video and sources online!
The first prototype of the device is finally completed! Here’s a brief recap of what have been done and what’s planned for the future.
Continue reading 1337 3310 tool demo video and sources online!